Coleman Saluspa Inflatable Hot Tub Spa Setup Instructions
Setting up your Coleman Saluspa inflatable hot tub spa is a relatively easy process. However, it's important to follow the instructions carefully to ensure a safe and enjoyable experience. Here's a step-by-step guide to help you get started:
1. Choosing the Right Location
- Level Surface: The first step is to choose a level surface for your hot tub. Avoid placing it on uneven ground, as this can cause instability and damage to the tub.
- Protection: Ensure the location is protected from direct sunlight and inclement weather. Sunlight can cause the water to heat up quickly, while rain can dilute the chemicals.
- Drainage: Make sure there's proper drainage around the hot tub. This will prevent water from accumulating and causing problems.
2. Unpacking and Inflating
- Unpacking: Carefully unpack the hot tub and its accessories. Inspect the tub for any damage before proceeding.
- Inflation: Use the included air pump to inflate the hot tub. Make sure to inflate it to the recommended pressure.
- Adding Water: Fill the tub with water using a garden hose. Follow the water level markings on the tub.
3. Setting Up the Control Panel
- Locate the Control Panel: The control panel is usually located on the side of the tub.
- Connect the Power: Connect the power cord to the control panel and to a grounded electrical outlet.
- Turn on the Power: Turn on the power switch and check the display to ensure the control panel is working.
4. Adding Chemicals
- Start with Clean Water: Before adding any chemicals, make sure the water is clean and free of debris.
- Use the Recommended Chemicals: Use the recommended chemicals for your hot tub. It's important to check the instructions on the chemical containers.
- Test the Water: Use test strips to regularly check the pH, chlorine, and bromine levels in the water.
5. Enjoying Your Hot Tub
- Wait for the Water to Heat Up: Allow the hot tub to heat up to your desired temperature.
- Relax and Enjoy: Once the water is heated, you can enjoy a relaxing soak in your hot tub.
Maintenance Tips
- Clean the Tub Regularly: Clean the hot tub with a mild detergent and a soft cloth after each use.
- Replace the Water: Replace the water in your hot tub every 3-4 months.
- Test the Chemicals: Test the water chemistry regularly and adjust the chemical levels as needed.
- Store Properly: When not in use, drain the tub, deflate it, and store it in a dry place.
By following these steps and taking care of your hot tub, you can enjoy a relaxing and enjoyable experience for years to come.