How to Install a Wedi Curbless Shower Pan
A Wedi curbless shower pan is a great way to create a modern and accessible shower space. The Wedi system is known for its durability, waterproofness, and ease of installation. Here's a step-by-step guide on how to install a Wedi curbless shower pan:
Materials Needed:
- Wedi Fundo shower pan (choose the size and style that fits your project)
- Wedi Board
- Wedi Primer
- Wedi Adhesive
- Wedi Waterproofing Membrane (Wedi Seal)
- Wedi Drain
- Waterproofing Tape
- Construction Adhesive
- Mortar
- Tile
- Grout
- Tools (level, tape measure, utility knife, trowel, mixing bucket, etc.)
Preparation:
- Prepare the Subfloor: Ensure the subfloor is level and strong enough to support the shower pan.
- Install the Drain: Install the Wedi drain according to the manufacturer's instructions. This will likely involve creating a hole in the subfloor and securing the drain with a flange.
- Install the Wedi Shower Pan: Center the shower pan over the drain and secure it to the subfloor using construction adhesive.
Building the Shower Base:
- Cut and Install Wedi Board: Cut Wedi Board to size to create the shower base walls. Apply Wedi Adhesive to the back of the Wedi Board and attach it to the shower pan and subfloor, ensuring a tight fit.
- Waterproof the Base: Apply Wedi Primer to the entire shower base, including the shower pan and the Wedi Board walls. This creates a strong bond for the Wedi Waterproofing Membrane (Wedi Seal).
- Apply the Waterproofing Membrane: Apply the Wedi Seal to the shower base, ensuring it overlaps the seams and corners. Seal the Wedi Seal with Waterproofing Tape for added protection.
Finishing Touches:
- Install Tile: Apply mortar to the Wedi Board walls and attach your chosen tile.
- Grout: After the mortar has cured, grout the tile to create a seamless and watertight finish.
- Caulking: Caulk around the edges of the shower base and any gaps between the tile and the wall for a clean and water-resistant finish.
Safety Precautions:
- Wear protective gear: Use gloves, eye protection, and a respirator when working with Wedi products.
- Follow instructions: Always carefully read and follow the manufacturer's instructions for each Wedi product.
- Ventilate: Ensure proper ventilation during the installation process.
By following these steps, you can successfully install a Wedi curbless shower pan and enjoy a beautiful and functional shower space.
Note: This is a general guide, and specific installation procedures may vary depending on your chosen Wedi products and project requirements. Always consult the manufacturer's instructions for detailed information and guidance.
