MAPEI Ultracare Penetrating Stone Tile and Grout Sealer Instructions
Introduction
MAPEI Ultracare Penetrating Stone Tile and Grout Sealer is a water-based, penetrating sealer designed to protect natural stone and grout from stains and moisture. It is ideal for use on porous surfaces such as marble, limestone, travertine, sandstone, slate, and granite.
Before You Begin
- Ensure proper ventilation: Work in a well-ventilated area.
- Clean the surface thoroughly: The surface must be clean and free of dirt, grease, and other contaminants. You can use MAPEI's cleaning products specifically designed for natural stone.
- Allow the surface to dry completely: Make sure the surface is completely dry before applying the sealer.
Application Instructions
- Shake the container well: Shake the container of Ultracare thoroughly before use.
- Apply the sealer evenly: Use a clean, lint-free cloth or brush to apply the sealer evenly to the surface. Avoid puddles.
- Allow the sealer to dry: Allow the sealer to dry for at least 24 hours before applying a second coat.
- Apply a second coat: You may want to apply a second coat for added protection, depending on the porosity of the surface.
Important Notes
- Avoid over-application: Too much sealer can leave a cloudy film on the surface.
- Test in an inconspicuous area: Always test the sealer in an inconspicuous area first to ensure compatibility with your stone.
- Consult the product label: For more specific instructions, please refer to the product label.
Cleaning and Maintenance
- Regular cleaning: Clean the surface regularly with a mild soap and water solution.
- Avoid harsh chemicals: Avoid using harsh chemicals or abrasive cleaners, as these can damage the sealer.
- Re-apply the sealer periodically: You may need to re-apply the sealer periodically, depending on the amount of traffic and wear the surface receives.
Tips for Best Results
- Apply in thin coats: Apply thin coats of sealer for optimal penetration.
- Allow sufficient drying time: Ensure that the sealer dries completely between coats.
- Use a quality brush or applicator: Using a quality brush or applicator will help to ensure even application.
By following these instructions, you can effectively use MAPEI Ultracare Penetrating Stone Tile and Grout Sealer to protect your natural stone surfaces and keep them looking their best.