Saluspa Coronado Energysense Smart Airjet Inflatable Hot Tub Manual
The Saluspa Coronado Energysense Smart Airjet Inflatable Hot Tub is a luxurious and convenient way to enjoy a relaxing soak at home. This manual will guide you through setting up, using, and maintaining your new hot tub.
Unpacking and Setup
- Unpack the box: Carefully remove all contents from the box, including the hot tub, control panel, air pump, filter cartridge, and instruction manual.
- Find a suitable location: Choose a flat, level surface for your hot tub. Ensure the area is free of sharp objects and debris.
- Inflate the hot tub: Connect the air pump to the inflation valve and inflate the hot tub until it is firm.
- Fill with water: Connect the garden hose to the fill valve and fill the hot tub with water to the recommended level.
- Install the control panel: Connect the control panel to the power source and place it within reach of the hot tub.
- Add chemicals: Add the appropriate amount of chlorine and pH balancer to maintain water purity.
- Turn on the heater: Set the desired temperature on the control panel and allow the hot tub to heat up.
Using Your Saluspa Coronado
- Enjoy your hot tub: Once the water has reached the desired temperature, you can relax and enjoy your hot tub.
- Use the air jets: The air jets provide a soothing massage experience. Adjust the air jet intensity to your liking.
- Control the temperature: Use the control panel to adjust the water temperature as needed.
- Clean the filter: Regularly clean the filter cartridge to ensure optimal water quality.
Maintenance
- Water sanitation: Regularly check the chlorine and pH levels and add chemicals as needed.
- Filter cleaning: Clean the filter cartridge every 1-2 weeks, depending on usage.
- Drain and refill: Drain and refill the hot tub every 3-4 months to maintain water quality and prevent mineral buildup.
- Winterizing: If you live in a cold climate, you will need to winterize your hot tub before the first frost. Consult the manual for instructions.
Troubleshooting
- No power: Check the power cord and the power source.
- No heat: Make sure the heater is turned on and the temperature is set correctly.
- Low water level: Check the water level and add more water if necessary.
- Cloudy water: Check the chlorine and pH levels and add chemicals as needed.
Safety
- Never leave children unattended near the hot tub.
- Always test the water temperature before entering.
- Avoid using the hot tub if you are under the influence of alcohol or drugs.
- Do not use the hot tub if you have any open wounds or skin conditions.
By following these instructions, you can enjoy your Saluspa Coronado Energysense Smart Airjet Inflatable Hot Tub for many years to come.
